LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Heaters >> Seat Heater Replacement >> Seat Cushion Heater

Seat Cushion Heater

NOTE: SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing.
  1. Remove the seat cushion cover (see SEAT CUSHION COVER REPLACEMENT ).
  2. Carefully remove the seat cushion heater (A) from the seat cushion pad (B).
    NOTE: The seat cushion heater is glued to the seat cushion pad. When removing it, take care not to damage the seat cushion pad.
    Fig 1: Identifying Seat Cushion Heater And Seat Cushion Pad
    G00514339Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the removed parts in the reverse order of removal.
scientia non olet · About LEMON Manuals