LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Front Bulkhead Cover Replacement

Front Bulkhead Cover Replacement

NOTE: Take care not to scratch the front bumper and body.
  1. Remove the clips, then remove the air intake duct (A).
    Fig 1: Identifying Air Intake Duct And Clips
    G05965929Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the front bulkhead cover (A).
    1. -1 Remove the clips.
    2. -2 Release the side edges (B) of the cover from the front fenders (C) on both sides, and pass the hood latch knob (D) through the hole in the cover.
    Fig 2: Identifying Front Bulkhead Cover Clips
    G05965930Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the cover in the reverse order of removal, and note these items:
scientia non olet · About LEMON Manuals