Audio disc does not load
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST ).
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.
- Make sure the audio disc is compatible with the system (see the Owner's Manual for more information).
- Turn the ignition switch to ON (II).
- Turn on the audio unit, and insert a known-good disc to see if the symptom can be duplicated.
Does the disc load?
YES -Operation is normal. If the disc loads normally, but will not play, go to Audio disc does not play troubleshooting (see AUDIO DISC DOES NOT PLAY ). ■
NO -Go to step 3.
- Insert another disc.
Does the disc load?
YES -The original disc is faulty. ■
NO -
- With navigation: Substitute a known-good audio disc changer (see AUDIO DISC CHANGER REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the audio disc changer (see AUDIO DISC CHANGER REMOVAL/INSTALLATION ). ■
- Without navigation: Substitute a known-good audio unit, (see AUDIO DISC CHANGER REMOVAL/INSTALLATION ) and recheck. If the symptom/indication goes away, replace the audio unit, (see AUDIO UNIT REMOVAL/INSTALLATION ). ■