Minor Adjustment
- Raise and support the vehicle (see LIFT AND SUPPORT POINTS
).
- Release the parking brake pedal fully.
- Press the parking brake pedal 1 click.
- Remove the adjusting nut cap (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Tighten the parking brake adjusting nut (B) until the parking brakes drag slightly when the rear wheels are turned.
- Release the parking brake pedal fully, and check that the parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
- Make sure the parking brake pedal is within the specified number of clicks (10 to 12 clicks).