LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Fuel Fill Door >> Fuel Fill Door Adjustment

Fuel Fill Door Adjustment

  1. Loosen the hinge mounting bolts (A) slightly.
    Fig 1: Hinge Mounting Bolts With Torque Specifications
    G05965894Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Adjust the fuel fill door (B) in or out until it's flush with the body, and up or down as necessary to equalize the gaps.
  3. Tighten the hinge mounting bolts.
  4. Make sure the fuel fill door opens properly and locks securely.
  5. Apply multipurpose grease to each location indicated by the arrows.
    Fig 2: Identifying Fuel Fill Door Grease Area
    G05965895Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Apply touch-up paint to the hinge mounting bolts and around the hinges.
scientia non olet · About LEMON Manuals