LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> Rear Bumper Air Spoiler Replacement

Rear Bumper Air Spoiler Replacement

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the rear bumper.
  1. Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).
  2. Remove the bolts and the clips. Pry all of the hooks (A) up with an appropriate trim tool, then remove the rear bumper air spoiler (B) from the rear bumper (C). Take care not to scratch the rear bumper.
    Fig 1: Rear Bumper Hooks With Torque Specifications
    G05965833Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the spoiler in the reverse order of removal, and note these items:
scientia non olet · About LEMON Manuals