LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Heaters >> Seat Heater Test >> Front Passenger's Seat

Front Passenger's Seat

NOTE: SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX)
, and the precautions and procedures (see PRECAUTIONS AND PROCEDURES
) before doing repairs or servicing.
  1. Remove the passenger's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  2. Disconnect the 4P connector (A) from the seat heater.
    Fig 1: Identifying Seat Heater 4P Connector Terminals
    G05968891Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between seat heater 4P connector terminals No. 1 and No. 3, and terminals No. 1 and No. 2. There should be continuity.
  4. If the continuity is not as specified, replace the seat heater.