While ignition is in the ON (II) position the D indicator remains on in all shift lever positions or fails to come on at all

When you turn the ignition switch to ON (II), the D indicator comes on and stays on in all shift lever positions, or it never comes on at all

F-CAN communication line error

Gauge control module defective

PCM defective

Notes

Check the F-CAN communication line F-CAN Circuit Troubleshooting.

Notes

Check the F-CAN communication line by using the gauge control module self-diagnostic function.

Notes

Check the A/T gear position indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function Testing and Inspection.