LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 6-Speed) >> Transmission Housing >> Reverse Idler Gear Removal/Installation

Reverse Idler Gear Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the reverse idler gear assembly (A) from the transmission housing.
    Fig 1: Identifying Reverse Idler Gear Assembly Bolts Tightening Sequence
    G06969332Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the reverse idler gear assembly in the transmission housing. Tighten the bolts in the numbered sequence shown.
scientia non olet · About LEMON Manuals