Park Pin Switch Replacement
WARNING: This page is about a different variant/trim than selected.
NOTE:
The park pin switch is installed in the shift cable bracket, and not available separately from the shift cable bracket; replace the park pin switch and the shift cable bracket as an assembly.
- Remove the shift lever assembly (see SHIFT LEVER REMOVAL ).
- Disassemble the shift lever assembly (see SHIFT LEVER DISASSEMBLY/REASSEMBLY ).
- Replace the park pin switch/shift lever/shift cable bracket assembly.
- Assemble the shift lever assembly (see SHIFT LEVER DISASSEMBLY/REASSEMBLY ).
- Install the shift lever assembly (see SHIFT LEVER INSTALLATION ).