Oil Seal Replacement

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Oil Seal Driver Attachment, 58 mm 07JAD-PH80101
• Oil Seal Driver Attachment, 60 mm 07LAD-SM40100

1. Remove the oil seal from the transmission housing.
   Fig 1: Removing Oil Seal From Transmission Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the oil seal from the torque converter housing.
   Fig 2: Removing Oil Seal From Torque Converter Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install a new oil seal flush with the transmission housing using the 15 x 135L drive handle and the 60 mm oil seal driver attachment.
   Fig 3: Installing Oil Seal Flush With Transmission Housing Using 15 x 135L Drive Handle And 60 mm Oil Seal Driver Attachment

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Install a new oil seal flush with the torque converter housing using the 15 x 135L drive handle and the 58 mm oil seal driver attachment.
   Fig 4: Installing Oil Seal Flush With Torque Converter Housing Using 15 x 135L Drive Handle And 58 mm Oil Seal Driver Attachment

   Courtesy of AMERICAN HONDA MOTOR CO., INC.