Front Fog Light Trim Replacement

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the bumper.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
The left side is shown; the right side is similar.

Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Release the hooks (A) (seven places), then remove the front fog light trim (B).

Fig 1: Identifying Front Fog Light Trim And Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and push the hooks into place securely.