Rear Seat Belt Buckles and Rear Center Seat Belt Buckle

NOTE:

Put on gloves to protect your hands.
Take care not to tear or damage the seat covers.

Remove the seat cushion (see REAR SEAT REMOVAL/INSTALLATION ).
Remove the bolts, then remove the rear seat belt buckles (A) and the rear center seat belt buckle (B).
Left side

Fig 1: Bolts, Rear Seat Belt Buckles And Rear Center Seat Belt Buckle With Torque Specifications - Left Side
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Right side

Fig 2: Bolts, Rear Seat Belt Buckles And Rear Center Seat Belt Buckle With Torque Specifications - Right Side
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the buckle in the reverse order of removal, and note these items:
- Tighten the bolts by hand first, then tighten to the specified torque.
- Assemble the washer on the anchor bolt as shown.
Anchor bolt installation

Fig 3: Identifying Anchor Bolt Installation
Courtesy of AMERICAN HONDA MOTOR CO., INC.