LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Insight Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

  1. Remove the intake manifold (see REMOVAL ).
  2. Remove the eight ignition coils (see IGNITION COIL AND SPARK PLUG REMOVAL/INSTALLATION ).
  3. Remove the harness holder (A), and disconnect the breather hose (B).
    Fig 1: Identifying Harness Holder And Breather Hose
    G08091879Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the cylinder head cover.
    Fig 2: Identifying Cylinder Head Cover Assembly
    G08091880Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals