Lower Front Bumper Grille Replacement

Lower Front Bumper Grille Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

With Front Fog Lights

NOTE:

- Take care not to scratch the front bumper.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the front bumper Front Bumper Removal/Installation.

2. Remove the clips, and release the hooks (A), then remove the lower front bumper grille (B) from the front bumper (C).

NOTE: To release the clips, pry up on the center pin at the notch (D).





3. Install the bumper grille in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.