Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All,Both Axles		1.8		B
Front,Both Sides		1.0		B
Rear,Both Sides		1.0		B
Combination Procedure: AXLE OR WHEEL BEARING: Replace:
Rear,Each		0.6		B
Combination Procedure: CALIPER: Overhaul: Includes: Bleed Brake System.
One		0.7		B
Combination Procedure: CALIPER: Replace: Includes: Bleed Brake System.
One		0.5		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: This operation does not apply to drive axles. If on vehicle refinishing is not possible use appropriate repair operation.
	Not Applicable.			B
Combination Procedure: DISC ROTOR: Replace:
Front,Each		0.1		B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
		0.6		B
Combination Procedure: WHEEL BEARING: Replace:
Front	Refer to Front Wheel Bearing - R&R.			B