Rocker Arm and Shaft Disassembly/Reassembly

NOTE:

Identify each part as it is removed so that each item can be reinstalled in their original location.
Remove the rocker shaft bolts before disassembling the rocker arms.
Inspect the rocker shaft and rocker arms (see ROCKER ARM AND SHAFT INSPECTION ).
If reused, the rocker arms must be installed in their original location.
Bundle the rocker arms with rubber bands to keep them together as a set, and remove the bands after the rocker arms have been installed.
Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
Apply new engine oil to the threads of the rocker shaft bolts when installing them.
When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.

Fig 1: Disassembling View Of Rocker Arm , Shaft And Bolts With Torque Specifications