Cam Chain Case Oil Seal Installation

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Attachment, 52 x 55 mm 07746-0010400

1. Clean and dry the cam chain case oil seal housing.
2. Apply a light coat of new engine oil to the lip of the cam chain case oil seal.
3. Use the driver handle and the bearing driver attachment to drive a new oil seal squarely into the cam chain case to the specified installed height.
   Fig 1: Tapping Oil Seal Into Cam Chain Case

   
4. Measure the distance between the cam chain case surface (A) and the oil seal (B).

   Oil Seal Installed Height: 

   30.3-31.0 mm (1.19-1.22 in) 

   Fig 2: Measuring Distance Between Cam Chain Case Surface And Oil Seal