LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Insight Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> CMP Pulse Plate Removal and Installation >> Installation

CMP Pulse Plate Removal and Installation: Installation

  1. Install the CMP pulse plate (A).
    Fig 1: Installing CMP Pulse Plate And Tightening Bolt With Torque Specifications
    G06428906
  2. Hold the camshaft with a 27 mm open-end wrench (B), then tighten the bolt (C).
  3. Install the new cylinder head plug.
    Fig 2: Identifying Cylinder Head Plug
    G06428907
  4. Install the harness holder and the ground cable (see step  16 ).
  5. Install the cylinder head cover (see CYLINDER HEAD COVER INSTALLATION  ).
  6. Install the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals