Excessive Shock Or Flares On All Upshifts And Downshifts

Excessive shock or flares on all upshifts and downshifts

Worn engine or transmission mounts

Input shaft (mainshaft) speed sensor defective

Output shaft (countershaft) speed sensor defective

ATF temperature sensor defective

Foreign material in separator plate orifice

Notes

Check the engine and transmission mounts.

Notes

Check the speed sensor installation.

Notes

Inspect the sensor O-rings.

Notes

Check for a clogged orifice in the separator plate. If the orifice is clogged, remove it and clean the separator plate orifice.