Sunroof / Moonroof Limit Switch: Service and Repair

Moonroof Limit Switch Replacement

SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

1. Remove the headliner Service and Repair.

2. Mark the position of the moonroof limit switch (A) on the moonroof frame (B).





3. Disconnect the 4P connector (C) from the moonroof limit switch.

4. Remove the two mounting bolts (D).

5. Install the switch in the reverse order of removal.

6. Adjust the moonroof limit switch as needed Adjustments.