Front Bumper Fog Light Cover Replacement

Front Bumper Fog Light Cover Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the front bumper.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Pry the hooks (A) up with a trim tool, then remove the front bumper fog light cover (B) from the front bumper (C).






2. For some models: If necessary, release the hooks (D), then remove the front fog light cover cap (E).

3. Install the bumper fog light cover in the reverse order of removal.