Glove Compartment Lock Cylinder: Service and Repair

Glove Box Lock Cylinder Replacement

NOTE: Take care not to scratch the glove box.

1. Remove the glove box Service and Repair.

2. Remove the screws, then remove the glove box handle (A) from the glove box (B).






3. Remove the glove box lock cylinder (A).

1. Release the hooks (B), then remove the glove box cylinder cap (C).

2. Pull one end of the retainer (D) out of the slot with a hook-shaped tool, then remove the lock cylinder.





4. Reinstall the lock cylinder reverse order of removal.