B2601

DTC Troubleshooting: B2601

DTC B2601:

Parking Sensor CPU Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Check for DTCs with the HDS.

Is DTC B2601 indicated?

YES -

Replace the parking and back-up sensor control unit.�

NO -

Intermittent failure, the system is OK at this time.�