Conditions for clearing the fuel fill cap caution
- When the fuel fill cap caution is displayed by the first drive cycle leak judgment (Pending DTC stored) at a 0.02 inch leak or a 0.09 inch leak, the fuel fill cap caution goes out when the next failure occurs (second drive cycle) and P0455 or P0456 is stored. (MIL illuminates)
- When no leak is judged by a 0.02 inch leak or a 0.09 inch leak after the fuel fill cap caution is displayed, the fuel fill cap caution goes out when the ignition switch is turned to ON (II) the next time.
- When driven three times without this failure detected and a 0.02 inch leak or a 0.09 inch leak detection is not done after the fuel fill cap caution is displayed, the fuel fill cap caution goes out.
- Use the Clear command of scan tool to erase the caution. The caution is erased when the MIL is illuminated.