Driver's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard and its related parts.

Remove the driver's dashboard undercover (A).
1. Turn the lock knob (B) 90 °.
2. Gently pull down the rear edge to detach the clips (C, D).
3. Pull the undercover away to release the pins (E) from the holders (F).
Fig 1: Identifying Driver's Dashboard Undercover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the undercover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and pins into place securely.