How To Use This Service Information: Symbols: Wires

Wire insulation can be one color, or one color with another color stripe. (The second color is the color of the stripe.)

Fig 1: Identifying Wire Color Code

This circuit continues on another illustration or at a different location in the same illustration. The arrow shows direction of current flow. To follow the RED/BLK wire in these examples, you would look for the "A" arrow on the following illustration or on the current illustration.

Fig 2: Identifying Direction Of Current Flow (Following Illustration)

Fig 3: Identifying Direction Of Current Flow (Current Illustration)

This means that the branch of the wire connects to another circuit. The arrow points to the name of the circuit branch where the wire continues.

Fig 4: Circuit Branch Symbol

A broken line means that this part of the circuit is not shown; refer to the appropriate diagram in OEM CIRCUIT DIAGRAMS for the complete schematic.

Fig 5: Broken Line Symbol

Where separate wires join, only the splice is shown; for details on the additional wiring, refer to the appropriate diagram in OEM CIRCUIT DIAGRAMS.

Fig 6: Separate Wires Join Symbol

Wire choices for options or different models are labeled and shown with a "choice" bracket like this.

Fig 7: Wire Choices Symbol

This broken line means that both terminals are in connector C134.

Fig 8: Both Terminals Broken Line Symbol