Transfer Drive Gear Bearing Replacement (A/T)

Transfer Drive Gear Bearing Replacement

Special Tools Required

- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 37 x 40 mm 07746-0010200
- Bearing Driver Attachment, 52 x 55 mm 07746-0010400

1. Remove the tapered roller bearing (A) from the transfer drive gear (B) using the driver handle, the 37 x 40 mm attachment, a bearing separator (C), and a press.






2. Install a new tapered roller bearing (A) on the transfer drive gear (B) using the driver handle, the 52 x 55 mm attachment, and a press.