Side Airbag Cutoff Indicator Stays On After Bulb Check, And No DTCs Are Stored, Or Side Airbag Cutoff Indicator Flashes

Side airbag cutoff indicator stays on after bulb check, and no DTCs are stored, or side airbag cutoff indicator flashes

Make sure nothing is on the front passenger's seat.

If the side airbag cutoff indicator stays on after the ignition switch is turned to ON (II), do the ODS unit initialization Programming and Relearning.

If the side airbag cutoff indicator operates normally, the system is OK.

If the side airbag cutoff indicator stays on or blinks, replace the seat-back cover/pad with equipped OPDS sensor Front Seat-Back Cover Replacement.