LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2010 >> Element 2WD L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Axle Shaft Assembly >> Service and Repair >> Removal and Replacement >> Driveshaft Dynamic Damper Replacement

Driveshaft Dynamic Damper Replacement




Driveshaft Dynamic Damper Replacement

1. Remove the inboard joint.

2. Remove the dynamic damper band.

3. Remove the dynamic damper (A).





4. Install a new dynamic damper.

5. Adjust the specified distance (A) between the outboard joint side and the dynamic damper edge.









6. Install the dynamic damper band.

7. Install the inboard joint.

scientia non olet · About LEMON Manuals