Tail Lamp: Service and Repair

Taillight Replacement

1. Open the hatch and the tailgate.

2. Remove the two mounting bolts (A) from the taillight (B).










'07-08 models





'09-11 models





3. Pull the taillight away from the body to disengage the clip (C).

4. Turn the bulb socket 45 ° counterclockwise to remove the bulb socket.

5. If replacement of the taillight harness is necessary, remove the taillight harness grommet (D) from the body, and disconnect the 5P connector (E) from the wire harness.

6. Install the taillight in the reverse order of removal, and run water over it to make sure it does not leak.