Rearview Mirror Replacement

Rearview Mirror Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the headliner.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Carefully remove the headliner cap (A) by releasing the hooks (B) from the headliner (C) with the appropriate trim tool. Remove the cap by opening the slit (D) and pulling the cap over the rearview mirror stay (E).






2. Remove the screws, then remove the rearview mirror (A).





3. Install the rearview mirror in the reverse order of removal and push the hooks into place securely.