41-3x

SRS DTC Troubleshooting: 41-2x, 41-3x, 41-Bx

DTC 41-2x, 41-3x, 41-Bx ("x" can be 0 thru 9 or A thru F):

Internal Failure of the Left Front Impact Sensor

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures Service and Repair and General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Clear the DTC memory.

2. Turn the ignition switch to ON (II), then wait for 10 seconds.

3. Read the DTC.

Is DTC 41-2x, 41-3x, or 41-Bx indicated?

YES -

Faulty left front impact sensor or SRS unit; replace the left front impact sensor Front Impact Sensor Replacement, then clear the DTC, and retest. If the DTC is still present, replace the SRS unit SRS Unit Replacement.�

NO -

Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.�