Manufacturer Code Charts: 1402

Navigation System DTC Troubleshooting: 1402

DTC 1402:

Audio Error 2-CD

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- This navigation DTC sets when there is a problem with the audio-navigation unit internal audio disc player.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Check for the hard error code.

Is DTC 1402 indicated?

YES -

Check if the audio unit functions are working properly. If any problems are found, go to affected troubleshooting in audio section.�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).�