Manufacturer Code Charts: 105

VSA DTC Troubleshooting: 105

DTC 105:

Hydraulic Unit Temperature Sensor

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Test-drive the vehicle at 19 mph (30 km/h) or more.

NOTE: Drive the vehicle on the road, not on a lift.

4. Check for DTCs with the HDS.

Is DTC 105 indicated?

YES -

Replace the VSA modulator-control unit Service and Repair.�

NO -

The system is OK at this time.�