Ignition Switch Cannot Be Moved From Accessory (I) to Lock (0) (Key Is Pushed In, the Shift Lever In P)

Ignition switch cannot be moved from ACCESSORY (I) to LOCK (0) (key is pushed in, the shift lever in P)

Interlock control system circuit

Key interlock solenoid stuck ON

Park pin switch stuck OFF

Transmission range switch defective or out of adjustment

Notes

Troubleshoot the key interlock system circuit Key Interlock System Circuit Troubleshooting (Produced In USA Models With A/T).

Notes

Inspect the transmission range switch Testing and Inspection.