LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2010 >> Accord L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Service and Repair

Air Cleaner Housing: Service and Repair




Air Cleaner Removal/Installation

1. Disconnect the MAF sensor/IAT sensor connector (A).





2. Remove the harness clamps (B) and the bolts (C).

3. Loosen the band (D), then remove the air cleaner housing (E).

4. Install the parts in the reverse order of removal.

NOTE: When torqueing the screw of the hose band (F), align the edge of the hose band (G) with the mark (H) painted on the hose band.

scientia non olet · About LEMON Manuals