Side Airbag Cutoff Indicator Stays On After Bulb Check, and No DTCs Are Stored, or Side Airbag Cutoff Indicator Is Flashing

Side airbag cutoff indicator stays on after bulb check, and no DTCs are stored, or side airbag cutoff indicator is flashing

Diagnostic Procedure:

1. Make sure nothing is on the front passenger's seat.

2. If the side airbag cutoff indicator stays on after the ignition switch is turned to ON (II), initialize the ODS unit. Programming and Relearning

3. If the side airbag cutoff indicator operates normally, the system is OK.

4. If the side airbag cutoff indicator stays on or blinks, replace the OPDS sensor/seat-back cover/pad. Front Seat-Back Cover Replacement