LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> S2000 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges >> Rewriting the ODO Data and Transferring the Maintenance Minder Data to a New Gauge Assembly >> '06-09 models

'06-09 models

NOTE:
  • Obtain a new gauge assembly before starting the rewriting process.
  • Rewriting is not possible on a gauge assembly that will not communicate with the HDS.
  • Make sure that the HDS shows the correct VIN for the car you are working on.
  • Once you have started this procedure, you must complete it before removing the HDS from the DLC.
  • Connect a battery jumper box (not a battery charger) to insure that correct battery voltage will be maintained.
  1. Before replacing the gauge assembly, connect the HDS.
  2. Select GAUGES from the BODY ELECTRICAL system select menu with the HDS.
  3. Select "Gauge Assembly Replacement (ODO Rewrite)" from the ADJUSTMENT menu, and follow the instructions on the display to retrieve the ODO value and the Maintenance Minder Information.
  4. Replace the gauge assembly (see GAUGE ASSEMBLY REPLACEMENT ).
  5. Follow the instructions on the display to write the new ODO value and Maintenance Minder data to the new gauge assembly. If the data transfer fails, refer to the instructions below to release the locked ODO value.
scientia non olet · About LEMON Manuals