2ND Clutch Transmission Fluid Pressure Switch Replacement

2nd Clutch Transmission Fluid Pressure Switch Replacement

1. Remove the air cleaner assembly.
2. Disconnect the 2nd clutch transmission fluid pressure switch connector, and remove the 2nd clutch transmission fluid pressure switch.
3. Install the new 2nd clutch transmission fluid pressure switch (A) with a new sealing washer (B). Tighten the switch to the specified torque on the metal part, not the plastic part.





4. Check the connector for rust, dirt, or oil, and clean if necessary, then connect the connector securely.
5. Install the air cleaner assembly.