LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> S2000 L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Camshaft Gear/Sprocket >> Service and Repair >> Camshaft Gear Removal

Camshaft Gear Removal

Camshaft Gear Removal
1. Remove the cylinder head cover.
2. Loosen the rocker arm adjusting screws.
3. Remove the camshaft holders and camshafts. To prevent damaging the camshafts, unscrew the camshaft holder bolts two turns at a time, in a crisscross pattern.





4. Hold the camshaft with an open-end wrench, then loosen the camshaft gear mounting nut.





5. Remove the camshaft gear.

NOTE: The exhaust camshaft gear has a groove (A) in the face. The intake camshaft does not have a groove.
scientia non olet · About LEMON Manuals