Enable Conditions
ENABLE CONDITIONS
| Condition | Minimum | Maximum | ||||
|---|---|---|---|---|---|---|
| Elapsed time after starting the engine(1) | 10 seconds | - | ||||
| Time to judge excessive negative pressure(1) | 3 seconds | - | ||||
| Engine coolant temperature(2) | 140 °F (60 °C) | - | ||||
| Engine coolant temperature before EVAP purge control starts | 140 °F (60 °C) | - | ||||
| Fuel tank pressure(1) | - | -2 kPa (-10 mmHg, -0.4 in.Hg) | ||||
| Battery voltage | 10.5 V | - | ||||
| Fuel trim | 0.73 | 1.47 | ||||
| Fuel feedback | Closed loop | |||||
| Monitoring priority | P0455, P0457, P0497 | |||||
| No active DTCs | P0107, P0108, P0116, P0117, P0118, P0125, P0134, P0135, P0154, P0155, P0335, P0339, P0443, P0451, P0452, P0453, P0496, P0498, P0499, P0641, P1116, P1128, P1129, P1172, P1174, P2195, P2197, P2227, P2228, P2229, P2237, P2238, P2240, P2241, P2243, P2245, P2247, P2249, P2251, P2252, P2254, P2255, P2627, P2628, P2630, P2631, P2646, P2647 | |||||
|
||||||