LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

  1. Remove the intake manifold (see REMOVAL ).
  2. Remove the ignition coils (see IGNITION COIL REMOVAL/INSTALLATION ).
  3. Remove the harness bracket mounting bolt (A) and disconnect breather hose (B).
    Fig 1: Identifying Harness Bracket Mounting Bolt And Breather Hose
    G05454199Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the cylinder head cover.
    5. Fig 2: Identifying Cylinder Head Cover
    G05454200Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals