LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Element SC, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges >> Rewriting the ODO Data and Transferring Maintenance Minder on a New Gauge Control Module >> Rewriting Procedure

Rewriting Procedure

NOTE:
  • Obtain a new gauge control module before starting the rewriting process.
  • Rewriting is not possible on a gauge control module that will, not communicate with the HDS.
  • Make sure that the HDS shows the correct VIN for the car you are working on.
  • Once you have started this procedure, you must complete it before removing the HDS from the DLC.
  • Connect a battery jump box (not a Battery charger) to insure that correct battery voltage will be maintained.
  1. Before replacing the gauge control module, connect the HDS.
  2. Select GAUGES from the BODY ELECTRICAL menu display.
  3. Select "Gauge Control Module Replacement (ODO rewrite)" from the ADJUSTMENT menu, and follow the instructions on the display to retrieve the ODO value and the Maintenance Minder information.
  4. Replace the gauge control module.
  5. Follow the instructions on the display to write the new ODO value and Maintenance Minder to the new gauge control module. If the data transfer fails, refer to the instructions below to release the locked ODO value.
scientia non olet · About LEMON Manuals