LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Element 2WD L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Service and Repair >> Input Shaft (Mainshaft) Speed Sensor Replacement

Input Shaft (Mainshaft) Speed Sensor Replacement

Input Shaft (Mainshaft) Speed Sensor Replacement
1. Remove the air cleaner assembly.
2. Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor.
3. Install a new O-ring (A) on the new input shaft (mainshaft) speed sensor (B), then install the input shaft (mainshaft) speed sensor, and washer (C) in the transmission housing.





4. Check the connector for rust, dirt, or oil, and clean if necessary, then connect the connector securely.
5. Install the air cleaner assembly.
scientia non olet · About LEMON Manuals