DTC 41

DTC 41: Abnormal Signal Reception Error

NOTE: Inspect for an aftermarket device interfering with the RF signal from the sensors when driving the vehicle.

1. Turn the ignition switch OFF.
2. Install known-good TPMS wheels.
3. Memorize the tire pressure sensor ID with the HDS.
4. Turn the ignition switch ON (II).
5. Do the tire pressure sensor ID memorization.
Did each tire sensor respond to the TPMS initializer tool?
YES - Replace the appropriate tire pressure sensor.
NO - Go to step 6.

6. Substitute a known-good TPMS control unit, and memorize the tire pressure sensor IDs.
Did all sensor IDs register to the TPMS control unit tool?
YES - Replace the original TPMS control unit.
NO - Replace the appropriate tire pressure sensor that did not register to the TPMS control unit.