LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2006 >> Civic L4-1.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Front Crankshaft Seal >> Service and Repair >> Pulley End Crankshaft Oil Seal Installation

Pulley End Crankshaft Oil Seal Installation

Pulley End Crankshaft Oil Seal Installation

Special Tools Required
^ Driver 07749-0010000
^ Attachment, 60 mm 07LAD-SM40100





1. Using the special tools, Gently tap in the new oil seal until the driver bottoms on the oil pump.

scientia non olet · About LEMON Manuals