With Manufacturers Scan Tool

How to Retrieve TPMS DTCs





1. With the ignition switch OFF, connect the Honda Diagnostic System (HDS) to the 16P Data Link Connector (DLC) (A) under the left side of the dashboard.
2. Turn the ignition switch ON (II), and follow the prompts on the HDS to display the DTC(s) on the screen. After determining the DTC, refer to the DTC Troubleshooting.

NOTE: See the HDS help menu for specific instructions.


How to Clear TPMS DTCs

NOTE: You cannot clear the DTCs manually.





1. With the ignition switch OFF, connect the HDS to the 16P data link connector (DLC) (A) under the left side of the dashboard.
2. Turn the ignition switch ON (II), and clear the DTC(s) by following the screen prompts on the HDS.

NOTE: See the HDS help menu for specific instructions.