How to Reset
NOTE:
Make sure the headlights, taillights, and brake lights are off.
Press and hold the select/reset switch button, then turn the ignition switch ON (II), and continue to hold it for more than 10 seconds.
Blinking Pattern:
BLINKING PATTERN CHART
| Miles (km) | Maintenance Reminder Light |
|---|---|
| At 5,900 (9,440) to 6,100 (9,760) | Blinks for 10 seconds when the ignition switch is turned ON (II). |
| At 7,400 (11,840) to 7,600 (12,160) | Comes on and stays on while the ignition switch is ON (II). |