Trim Removal/Installation - Cargo Area

NOTE:

Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.

Remove the trim as shown. To remove the cargo box, remove both rear side trim panels (see TRIM REMOVAL/INSTALLATION - REAR SIDE AREA ).
Install the trim in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Push the clips into place securely.
Fig 1: Identifying Fastener Locations - Cargo Area
Courtesy of AMERICAN HONDA MOTOR CO., INC.